Celeris Drive is an engineering firm in the business of BLDC motor drives, AC motor drives, electric motors, PC board assemblies, embedded systems, and engineering consulting.
Celeris Drive is an engineering firm in the business of BLDC motor drives, AC motor drives, electric motors, PC board assemblies, embedded systems, and engineering consulting.
These DSP based compact controllers are for controlling the BLDC motors with or without Hall sensors.
FEATURES:
Detect whether the Hall sensors are connected to the controller. Runs normal BLDC motor control algorithm if Hall sensors are detected, or runs sensorless algorithm if no Hall sensor is detected automatically,
RS232 serial communication port,
Fault protection and recovery,
PC GUI program for setting controller parameters such as current limits, PWM carrier frequency, current and speed close loop regulator gains, tuning and running the controller,
Control command input from serial port or analog port (0 - 3.3VDC input or 10KOhm potentiometer),
Compact and low cost.
RATINGS:
Voltage: 12VDC to 50VDC
Current: 10A (5A for 50V controller) continuous
Temperature: 0°C to 55°C
Maximum frequency: 1000 Hz electric (30,000 RPM for 4 pole BLDC motor)
PWM carrier frequency: 5 KHz to 25 KHz
Dimension: 3.9" x 2.5" x 0.6" (99mm x 62mm x 15mm)
Download user manual here: Manual
These DSP based BLDC motor controllers are for controlling the BLDC motors with or without position sensors.
FEATURES:
Interface with Hall sensor and incremental encoder,
Detect whether the Hall sensors are connected to the controller. Runs normal BLDC motor control algorithm if Hall sensors are detected, or runs sensorless algorithm if no Hall sensor is detected automatically,
RS232 or RS485 serial communication port,
Fault protection and recovery,
PC GUI program for setting controller parameters such as current limits, PWM carrier frequency, current and speed close loop regulator gains, selecting position sensor type, tuning and running the controller,
Control command input from serial port or analog port (0 - 3.3VDC input or 10KOhm potentiometer),
Compact and low cost.
RATINGS:
Voltage: 12VDC to 50VDC
Current: 10A (5A for 50V controller) continuous
Temperature: 0°C to 55°C
Maximum frequency: 1000 Hz electric (30,000 RPM for 4 pole BLDC motor)
PWM carrier frequency: 5 KHz to 25 KHz
Dimension: 4.5" x 3.0" x 0.88" (115mm x 76mm x 22mm)
Download user manual here: Manual
Celeris Drive Technology provides services of motion control and embedded system design (hardware and firmware), electric motor design, prototyping (small quantity) and product manufacturing. Contact Celeris Drive Technology for details.
Celeris Drive Technology has contracting PCB assembly manufacturers in Shenzhen and Dongguan, China. We can provide high quality, fast turn out, low cost PCB assembly services on customer's gerber files and bill of materials. We also provide PC board manufacturing sevice. Contact Celeris Drive Technology for details.
| Address: | 7955 S Bay Curv Eden Prairie, MN 55347 |
|---|---|
| Phone: | 612-562-9427 |
| E-mail: | in[email protected] |